Intel® Simics® Simulator for Intel® FPGAs: Agilex™ 5 E-Series Virtual Platform User Guide

Download PDF
ID 786901
Date 4/01/2024
Public
Document Table of Contents
Document Table of Contents x
1. About This Document 2. Agilex™ 5 E-Series Intel® Simics® Virtual Platforms 3. Agilex™ 5 E-Series Virtual Platform Component Intel® Simics® Models 4. Running a Simulation with the Agilex™ 5 E-Series HPS Model 5. Supported Use Cases 6. Troubleshooting Issues When Migrating Software from Intel® Simics® to Hardware A. Document Revision History
1. About This Document x
1.1. Terminology 1.2. List of Acronyms
2. Agilex™ 5 E-Series Intel® Simics® Virtual Platforms x
2.1. Agilex™ 5 E-Series Universal Virtual Platform
2.1. Agilex™ 5 E-Series Universal Virtual Platform x
2.1.1. Agilex™ 5 E-Series Universal Virtual Platform Overview 2.1.2. Agilex™ 5 E-Series Universal Virtual Platform User-Configurable Parameters 2.1.3. Agilex™ 5 E-Series Virtual Platform Key Capabilities
2.1.1. Agilex™ 5 E-Series Universal Virtual Platform Overview x
2.1.1.1. Agilex™ 5 HPS Component 2.1.1.2. HPS Subsystem Component 2.1.1.3. FPGA Fabric Design 2.1.1.4. qsys_top Component 2.1.1.5. FPGA Component 2.1.1.6. Board Component 2.1.1.7. System Component 2.1.1.8. Target Script
2.1.3. Agilex™ 5 E-Series Virtual Platform Key Capabilities x
2.1.3.1. Boot-To-Operating System Prompt 2.1.3.2. Basic Ethernet 2.1.3.3. CPU Power-On and Boot Core Selection 2.1.3.4. Reset Flow 2.1.3.5. General Purpose I/O (GPIO) Loopback 2.1.3.6. USB Disks Hot-Plug Support 2.1.3.7. On-Chip Memory IP FPGA Fabric Example Design 2.1.3.8. FPGA-to-HPS Bridges 2.1.3.9. Exercising Peripheral Subsystem in FPGA Fabric Design 2.1.3.10. USB Controller Host/Device Mode Configuration 2.1.3.11. B0 Silicon Features Selection
3. Agilex™ 5 E-Series Virtual Platform Component Intel® Simics® Models x
3.1. Agilex™ 5 E-Series HPS Intel® Simics® Model 3.2. Virtual Platform HPS Subsystem Components 3.3. Virtual Platform qsys_top Components 3.4. Virtual Platform Board Components 3.5. Modeling Support Limitations
3.1. Agilex™ 5 E-Series HPS Intel® Simics® Model x
3.1.1. Agilex™ 5 E-Series HPS Intel® Simics® Model Architecture 3.1.2. PSS Subsystem Components 3.1.3. MPU and APS Subsystem 3.1.4. MPFE Subsystem 3.1.5. Additional Agilex™ 5 E-Series HPS Components 3.1.6. Agilex™ 5 E-Series B0 Features Support
3.2. Virtual Platform HPS Subsystem Components x
3.2.1. External Memory Interface (EMIF) 3.2.2. Security Device Manager (SDM)
3.3. Virtual Platform qsys_top Components x
3.3.1. FPGA Fabric
3.4. Virtual Platform Board Components x
3.4.1. Marvel EMAC PHY 3.4.2. SD Card Device 3.4.3. ONFI NAND Memory Device 3.4.4. SPI Flash Device 3.4.5. AT24Cxx EEPROM Device 3.4.6. I3C Device 3.4.7. USB Disk Device 3.4.8. Intel® Simics® Text Console
4. Running a Simulation with the Agilex™ 5 E-Series HPS Model x
4.1. Prerequisites 4.2. Intel® Simics® Simulation Setup for the Agilex™ 5 E-Series Device 4.3. Starting the Simulation 4.4. Getting Device Information from the Intel® Simics® Model
1. About This Document
2. Agilex™ 5 E-Series Intel® Simics® Virtual Platforms
3. Agilex™ 5 E-Series Virtual Platform Component Intel® Simics® Models
4. Running a Simulation with the Agilex™ 5 E-Series HPS Model
5. Supported Use Cases
6. Troubleshooting Issues When Migrating Software from Intel® Simics® to Hardware
A. Document Revision History

2.1.2. Agilex™ 5 E-Series Universal Virtual Platform User-Configurable Parameters

The Agilex™ 5 E-Series Universal Virtual Platform has the following user-configurable parameters provided in the target script:

Table 7.   Agilex™ 5 E-Series Universal Virtual Platform Parameters
Parameter Description
create_hps_eth0_network

Create a basic Ethernet network and connect it to the eth0 peripheral of the Hard Processor System Agilex™ 5 FPGA IP.

  • Range: Boolean
  • Default value: True
create_hps_sd_card

Create the SD card in the board component and connect it to the SD/eMMC controller. You can set either the create_hps_sd_card or create_hps_mmc parameter to true at a time.

  • Range: Boolean
  • Default value: True
create_hps_mmc

Create the eMMC card in the board component and connect it to the SD/eMMC controller. You can set either the create_hps_sd_card or create_hps_mmc parameter to true at a time.

  • Range: Boolean
  • Default value: False
create_hps_serial0_console

Create a console component and connect it to the serial0 peripheral of the Hard Processor System Agilex™ 5 FPGA IP.

  • Range: Boolean
  • Default value: True
fsbl_image_filename

First stage bootloader file. Supported format is .bin .

  • Range: File name string.
  • Default value: ""
hps_boot_core

The CPU to use as the boot core.

  • Range: Integer: [0,2]
  • Default value: 0
hps_core0_1_power_on

The power-on states of CPU 0/1.

  • Range: Boolean
  • Default value: True
hps_core2_power_on

The power-on state of CPU 2.

  • Range: Boolean
  • Default value: True
hps_core3_power_on

The power-on state of CPU 3.

  • Range: Boolean
  • Default value: True
sd_image_filename

Name of the SD image to load into the SD memory model of the board component. The supported format is .craff, .img, or .wic.

  • Range: File name string.
  • Default value: ""
nand_data_image_filename

Name of the NAND image to load into the NAND memory model of the board component. The supported format is raw binary (.bin or .craff).

  • Range: File name string.
  • Default value: ""
nand_spare_image_filename

Name of the NAND spare image to load into the NAND memory model of the board component. The supported format is raw binary (.bin or .craff).

  • Range: File name string.
  • Default value: ""
qspi_image_filename

Name of the QSPI image to load into the QSPI memory model of the board component. The supported format is raw binary (.bin or .craff).

  • Range: File name string.
  • Default value: ""
usb3_image_filename

Name of the USB disk image that corresponds to the usb3_disk (SuperSpeed disk) in the board component. The image file must be smaller or equal than the disk size.

The supported format is .craff, .img or .wic.

  • Range: File name string.
  • Default value: ""
Note: usb3_disk is connected to usb1_typec port when a valid image file is provided by this parameter.
usb3_hs_image_filename

Name of the USB disk image that corresponds to the usb3_hs_disk (high-speed disk) in the board component. The image file must be smaller or equal than the disk size.

The supported format is .craff, .img or .wic.

  • Range: File name string.
  • Default value: ""
Note: usb3_hs_disk is connected to usb1_typec port if a valid image file is provided through the usb3_hs_image_filename parameter and usb1_typec port is available (when a valid image file is not provided in the usb3_image_filename parameter).
usb_otg_image_filename

Name of the USB disk image that corresponds to the usbotg_disk (high-speed disk) in the board component. The image file must be smaller or equal than the disk size.

The supported format is .craff, .img or .wic.

  • Range: File name string.
  • Default value: ""
Note: The usbotg_disk is connected to the usb0_otg port when a valid image file is provided by this parameter.
hps_cpu_freq_mhz ARM cores frequency in Megahertz (MHz).
  • Range: Integer between 400 and 1500
  • Default value: 400 MHz
stepping Select the silicon features that the Agilex™ 5 Simics model supports.
  • Range: A0 or B0
  • Default: A0. The B0 stepping features are available starting in 24.1 release, but during the project deployment, the A0 features remain being the default ones.
Level Two Title