DisplayPort Intel® Arria 10 FPGA IP Design Example User Guide

Download PDF
ID 683050
Date 2/01/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. DisplayPort Design Examples 3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices 4. DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide Archives 5. Revision History for DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. DisplayPort Design Examples x
2.1. Intel® Arria® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Intel® Arria® 10 DisplayPort MST Parallel Loopback Design Features 2.3. Enabling Adaptive Sync Support 2.4. Intel® Arria® 10 DisplayPort SST TX-only or RX-only Design Features 2.5. Design Components 2.6. Clocking Scheme 2.7. Interface Signals and Parameters 2.8. Hardware Setup 2.9. Simulation Testbench 2.10. DisplayPort Transceiver Reconfiguration Flow 2.11. Transceiver Lane Configurations
2.4. Intel® Arria® 10 DisplayPort SST TX-only or RX-only Design Features x
2.4.1. Intel® Arria® 10 DisplayPort SST TX-only Design Features 2.4.2. Intel® Arria® 10 DisplayPort SST RX-only Design Features
3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios II Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Set Up the Hardware 3.4.2. Generate the Design 3.4.3. Include HDCP Production Keys 3.4.4. Compile the Design 3.4.5. View the Results
3.4.3. Include HDCP Production Keys x
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.4.5. View the Results x
3.4.5.1. LED Functions
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. DisplayPort Design Examples
3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices
4. DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide Archives
5. Revision History for DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide

1.5. Compiling and Testing the Design

To compile and run a demonstration test on the hardware example design, follow these steps:
  1. Ensure hardware example design generation is complete.
  2. Launch the Intel® Quartus® Prime software and open <project directory>/quartus/a10_dp_demo.qpf.
    Note:

    The latest Bitec DisplayPort FMC daughter card has different schematics compared to the earlier revisions.

    Table 4.  RX Transceiver Channel Mapping
    Parameter Revisions 8 and Earlier Revision 10 Revision 11 Description
    Polarity Not inverted Inverted Inverted
    • When RX polarity is inverted, each lane at the rx_polinv port of the Native PHY is driven to 1 in the rx_phy_top.v file.
    • When RX polarity is not inverted, each lane at the rx_polinv port of the Native PHY is driven to 0 in the rx_phy_top.v file.
    Order Not reversed Not reversed Reversed The rx_parallel_data port of the Native PHY is directly mapped to the rx_parallel_data port of the DisplayPort IP.
    Table 5.  TX Transceiver Channel Mapping
    Parameter Revisions 8 and Earlier Revision 10 Revision 11 Description
    Polarity Inverted Not inverted Not inverted
    • When TX polarity is inverted, each lane at the tx_polinv port of the Native PHY is driven to 1 in the tx_phy_top.v file.
    • When TX polarity is not inverted, each lane at the tx_polinv port of the Native PHY is driven to 0 in the tx_phy_top.v file.
    Order Reversed Not reversed Not reversed
    • When the lane order is reversed, the data input at the tx_parallel_data port of the Native PHY is swapped in the tx_phy_top.v file based on the lane count configuration.
    • When the lane order is not reversed, tx_parallel_data port of the Native PHY is directly mapped to the tx_parallel_data port of the DisplayPort IP.
    To support all revisions, the design example top level RTL file at <project directory>/rtl/a10_dp_demo.v and the software config.h file include a local parameter for you to select the FMC revision.

    DisplayPort Intel® FPGA IP version 19.4.0: 

    localparam BITEC_DP_CARD_REV = 2;
    // 0 = Bitec FMC DP card rev.4 - 8,
    // 1 = rev.10
    // 2 = rev.11
    in <project>/software/dp_demo/config.h:
    #define BITEC_DP_CARD_REV 2
    // set to 0 = Bitec FMC DP card rev.4 - 8 
    // set to 1 = Bitec FMC DP card rev.10
    // set to 2 = Bitec FMC DP card rev.11
    The default value is 2. If the config.h file is updated, you must run build_sw.sh in the script folder before compiling the Intel® Quartus® Prime project to ensure the software is effective.
  3. Click Processing > Start Compilation.
  4. After successful compilation, the Intel® Quartus® Prime software generates a .sof file in your specified directory.
  5. Connect the DisplayPort RX connector on the Bitec daughter card to an external video source, such as the graphics card on a PC.
  6. Connect the DisplayPort TX connector on the Bitec daughter card to a video analyzer or a DisplayPort sink device, such as a PC monitor.
  7. Ensure all switches on the development board are in default position.
  8. Configure the selected Intel® Arria® 10 device on the development board using the generated .sof file (Tools > Programmer ).
  9. The DisplayPort sink device displays the video generated from the video source.

Section Content
Regenerating ELF File

Related Information
Level Two Title