Intel® Stratix® 10 Configuration User Guide

ID 683762
Date 10/21/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.5.1.3. Updating Decision Firmware

This section describes scenario when you must update the decision firmware in flash memory.

The RSU image consists of decision firmware, factory image, application image 1, and application image 2. Starting with Intel® Quartus® Prime software version 21.1, if you use an RSU image generated prior to Intel® Quartus® Prime software version 21.1, you must update the decision firmware with the Intel® Quartus® Prime software version 21.1 or later if you plan to deploy factory or application images from Intel® Quartus® Prime software version 21.1 or later.

You can choose to only update decision firmware or update decision firmware along with the factory image.

  • To update decision firmware and the factory image, run the following command to generate the RSU image:
    quartus_pfg –c <input.sof> <output.rpd> -o mode=ASx4 -o rsu_upgrade=ON
  • To update decision firmware only, run the following command to generate the RSU image:
    quartus_pfg –c <input.sof> <output.rpd> -o mode=ASx4 -o rsu_upgrade=ON -o firmware_only=ON

You can also use a combined application image to update decision firmware or decision firmware data in flash. For more information, refer to the Combined Application Images section in the Intel® Stratix® 10 Hard Processors System Remote System Update User Guide.

Typically, you update the decision firmware after the .rpd file is created as described in the Updates with the Factory Update Image.