HDMI Stratix® 10 FPGA IP Design Example User Guide

Download PDF
ID 683701
Date 4/09/2024
Public
Document Table of Contents
Document Table of Contents x
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Stratix® 10 Devices 2. HDMI 2.1 Design Example (Support FRL = 1) 3. HDMI 2.0 Design Example 4. HDCP Over HDMI 2.0/2.1 Design Example 5. HDMI Stratix® 10 FPGA IP Design Example User Guide Archives 6. Document Revision History for the HDMI Stratix® 10 FPGA IP Design Example User Guide
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Stratix® 10 Devices x
1.1. Directory Structure 1.2. Generating the Design 1.3. Hardware and Software Requirements 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. Design Limitation 1.7. HDMI Intel® FPGA IP Design Example Parameters
2. HDMI 2.1 Design Example (Support FRL = 1) x
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram 2.2. Creating RX-Only or TX-Only Designs 2.3. Hardware and Software Requirements 2.4. Directory Structure 2.5. Design Components 2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering 2.7. Design Software Flow 2.8. Running the Design in Different FRL Rates 2.9. Clocking Scheme 2.10. Interface Signals 2.11. Design RTL Parameters 2.12. Hardware Setup 2.13. Simulation Testbench 2.14. Design Limitations 2.15. Debugging Features
2.5. Design Components x
2.5.1. HDMI TX Components 2.5.2. HDMI RX Components 2.5.3. Top-Level Common Blocks
2.15. Debugging Features x
2.15.1. Software Debugging Message 2.15.2. SCDC Information from the Sink Connected to TX 2.15.3. Clock Frequency Measurement
3. HDMI 2.0 Design Example x
3.1. HDMI RX-TX Retransmit Design Block Diagram 3.2. Creating TX or RX Only Designs 3.3. Design Components 3.4. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering 3.5. Clocking Scheme 3.6. Interface Signals 3.7. Design RTL Parameters 3.8. Hardware Setup 3.9. Simulation Testbench 3.10. Upgrading Your Design
4. HDCP Over HDMI 2.0/2.1 Design Example x
4.1. High-bandwidth Digital Content Protection (HDCP) 4.2. Nios® V Processor Software Flow 4.3. Design Walkthrough 4.4. Protection of Encryption Key Embedded in FPGA Design 4.5. Security Considerations 4.6. Debug Guidelines
4.1. High-bandwidth Digital Content Protection (HDCP) x
4.1.1. HDCP Over HDMI Design Example Architecture
4.3. Design Walkthrough x
4.3.1. Setting Up the Hardware 4.3.2. Generating the Design 4.3.3. Including HDCP Production Keys 4.3.4. Compiling the Design 4.3.5. Viewing the Results
4.3.3. Including HDCP Production Keys x
4.3.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) 4.3.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1)
4.3.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) x
4.3.3.1.1. HDCP Key Mapping from DCP Key Files 4.3.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 4.3.3.1.3. hdcp2x_rx_kmem.v file 4.3.3.1.4. hdcp2x_tx_kmem.v file
4.3.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1) x
4.3.3.2.1. Intel KEYENC 4.3.3.2.2. Key Programmer
4.3.5. Viewing the Results x
4.3.5.1. Push Buttons and LED Functions
4.6. Debug Guidelines x
4.6.1. HDCP Status Signals 4.6.2. Modifying HDCP Software Parameters 4.6.3. Frequently Asked Questions (FAQ)
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Stratix® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Stratix® 10 FPGA IP Design Example User Guide Archives
6. Document Revision History for the HDMI Stratix® 10 FPGA IP Design Example User Guide

3.8. Hardware Setup

The HDMI Intel® FPGA IP design example is HDMI 2.0b capable and performs a loop-through demonstration for a standard HDMI video stream.
To run the hardware test, connect an HDMI-enabled device—such as a graphics card with HDMI interface—to the Transceiver Native PHY RX block, and the HDMI sink input.
  1. The HDMI sink decodes the port into a standard video stream and sends it to the clock recovery core.
  2. The HDMI RX core decodes the video, auxiliary, and audio data to be looped back in parallel to the HDMI TX core through the DCFIFO.
  3. The HDMI source port of the FMC daughter card transmits the image to a monitor.
Note: If you want to use another Intel FPGA development board, you must change the device assignments and the pin assignments. The transceiver analog setting is tested for the Stratix® 10 FPGA development kit and Bitec HDMI FMC 2.0 daughter card. You may modify the settings for your own board.
Table 47.  On-board Push Button and LED Functions
Push Button/LED Function
cpu_resetn

Press once to perform system reset.
user_pb[0]

Press once to toggle the HPD signal to the standard HDMI source.

user_pb[1]
  • Press and hold to instruct the TX core to send the DVI encoded signal.
  • Release to send the HDMI encoded signal.
user_pb[2]
  • Press and hold to instruct the TX core to stop sending the InfoFrames from the sideband signals.
  • Release to resume sending the InfoFrames from the sideband signals.
USER_LED[0]
HDMI PLL lock status.
  • Green = RX HDMI PLL is locked.
  • Red = TX HDMI PLL is locked.
  • Orange = Both RX and TX HDMI PLLs are locked.
  • Off = Both RX and TX HDMI PLLs are not locked.
USER_LED[1]
Transceiver ready status.
  • Green = RX transceiver is ready.
  • Red = TX transceiver is ready.
  • Orange = Both RX and TX transceivers are ready.
  • Off = Both RX and TX transceivers are not ready.
USER_LED[2]
RX HDMI core and TX transceiver PLL lock status.
  • Green = RX HDMI core is locked.
  • Red = TX transceiver PLL is locked.
  • Orange = RX HDMI core and TX transceiver PLL are locked.
  • Off = RX HDMI core and TX transceiver PLL are not locked.
USER_LED[3]
Oversampling status.
  • Green = RX is oversampled.
  • Red = TX is oversampled.
  • Orange = Both RX and TX are oversampled (Data rate < 1,000 Mbps)).
  • Off = Both RX and TX are not oversampled (Data rate ≥ 1,000 Mbps).
Level Two Title