Arria V GZ Avalon-ST Interface for PCIe Solutions: User Guide

Download PDF
ID 683297
Date 12/21/2020
Public
Document Table of Contents
Document Table of Contents x
1. Datasheet 2. Getting Started with the Arria® V GZ Hard IP for PCI Express 3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design 4. Parameter Settings 5. Interfaces and Signal Descriptions 6. Registers 7. Interrupts 8. Error Handling 9. PCI Express Protocol Stack 10. Transaction Layer Protocol (TLP) Details 11. Throughput Optimization 12. Design Implementation 13. Additional Features 14. Hard IP Reconfiguration 15. Transceiver PHY IP Reconfiguration 16. Testbench and Design Example 17. Debugging A. Lane Initialization and Reversal B. Document Revision History
1. Datasheet x
1.1. Arria® V GZ Avalon-ST Interface for PCIe Datasheet 1.2. Release Information 1.3. Device Family Support 1.4. Configurations 1.5. Avalon-ST Example Designs 1.6. Debug Features 1.7. IP Core Verification 1.8. Resource Utilization 1.9. Recommended Speed Grades 1.10. Creating a Design for PCI Express
1.1. Arria® V GZ Avalon-ST Interface for PCIe Datasheet x
1.1.1. Features
1.7. IP Core Verification x
1.7.1. Compatibility Testing Environment
2. Getting Started with the Arria® V GZ Hard IP for PCI Express x
2.1. Qsys Design Flow
2.1. Qsys Design Flow x
2.1.1. Generating the Testbench 2.1.2. Simulating the Example Design 2.1.3. Generating Synthesis Files 2.1.4. Understanding the Files Generated 2.1.5. Understanding Simulation Log File Generation 2.1.6. Understanding Physical Placement of the PCIe IP Core 2.1.7. Compiling the Design in the Qsys Design Flow 2.1.8. Modifying the Example Design 2.1.9. Using the IP Catalog To Generate Your Arria® V GZ Hard IP for PCI Express as a Separate Component
3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design x
3.1. Copying the Configuration Space Bypass Mode Example Design 3.2. Generating the Qsys System 3.3. Simulating the Example Design
3.2. Generating the Qsys System x
3.2.1. Generating Synthesis Files 3.2.2. Understanding the Generated Files 3.2.3. Understanding Simulation Log File Generation
3.3. Simulating the Example Design x
3.3.1. Timing for Configuration Read to Function 0 for the 256-Bit Avalon-ST Interface 3.3.2. Timing for Configuration Write to Function 0 for the 256-Bit Avalon-ST Interface 3.3.3. Timing for Memory Write and Read of Function 1 256-Bit Avalon-ST Interface 3.3.4. Partial Transcript for Configuration Space Bypass Simulation
4. Parameter Settings x
4.1. System Settings 4.2. Base Address Register (BAR) and Expansion ROM Settings 4.3. Base and Limit Registers for Root Ports 4.4. Device Identification Registers 4.5. PCI Express and PCI Capabilities Parameters 4.6. Vendor Specific Extended Capability (VSEC) 4.7. PHY Characteristics
4.5. PCI Express and PCI Capabilities Parameters x
4.5.1. PCI Express and PCI Capabilities 4.5.2. Error Reporting 4.5.3. Link Capabilities 4.5.4. MSI and MSI-X Capabilities 4.5.5. Slot Capabilities 4.5.6. Power Management
5. Interfaces and Signal Descriptions x
5.1. Clock Signals 5.2. Reset, Status, and Link Training Signals 5.3. ECRC Forwarding 5.4. Error Signals 5.5. Interrupts for Endpoints 5.6. Interrupts for Root Ports 5.7. Completion Side Band Signals 5.8. Configuration Space Bypass Mode Interface Signals 5.9. Parity Signals 5.10. LMI Signals 5.11. Transaction Layer Configuration Space Signals 5.12. Hard IP Reconfiguration Interface 5.13. Power Management Signals 5.14. Physical Layer Interface Signals
5.11. Transaction Layer Configuration Space Signals x
5.11.1. Configuration Space Register Access Timing 5.11.2. Configuration Space Register Access
5.14. Physical Layer Interface Signals x
5.14.1. Transceiver Reconfiguration 5.14.2. Serial Data Signals 5.14.3. PIPE Interface Signals 5.14.4. Test Signals
5.14.2. Serial Data Signals x
5.14.2.1. Physical Layout of Hard IP in Arria V GZ Devices 5.14.2.2. Channel Placement in Arria V GZ and Stratix V GX/GT/GS Devices
6. Registers x
6.1. Correspondence between Configuration Space Registers and the PCIe Specification 6.2. Type 0 Configuration Space Registers 6.3. Type 1 Configuration Space Registers 6.4. PCI Express Capability Structures 6.5. Intel-Defined VSEC Registers 6.6. CvP Registers 6.7. Uncorrectable Internal Error Mask Register 6.8. Uncorrectable Internal Error Status Register 6.9. Correctable Internal Error Mask Register 6.10. Correctable Internal Error Status Register
7. Interrupts x
7.1. Interrupts for Endpoints 7.2. Interrupts for Root Ports
7.1. Interrupts for Endpoints x
7.1.1. MSI and Legacy Interrupts 7.1.2. MSI-X 7.1.3. Implementing MSI-X Interrupts 7.1.4. Legacy Interrupts
8. Error Handling x
8.1. Physical Layer Errors 8.2. Data Link Layer Errors 8.3. Transaction Layer Errors 8.4. Error Reporting and Data Poisoning 8.5. Uncorrectable and Correctable Error Status Bits
9. PCI Express Protocol Stack x
9.1. Top-Level Interfaces 9.2. Transaction Layer 9.3. Data Link Layer 9.4. Physical Layer
9.1. Top-Level Interfaces x
9.1.1. Avalon-ST Interface 9.1.2. Clocks and Reset 9.1.3. Local Management Interface (LMI Interface) 9.1.4. Hard IP Reconfiguration 9.1.5. Transceiver Reconfiguration 9.1.6. Interrupts 9.1.7. PIPE
9.2. Transaction Layer x
9.2.1. Configuration Space 9.2.2. Configuration Space Bypass Mode
10. Transaction Layer Protocol (TLP) Details x
10.1. Supported Message Types 10.2. Transaction Layer Routing Rules 10.3. Receive Buffer Reordering
10.1. Supported Message Types x
10.1.1. INTX Messages 10.1.2. Power Management Messages 10.1.3. Error Signaling Messages 10.1.4. Locked Transaction Message 10.1.5. Slot Power Limit Message 10.1.6. Vendor-Defined Messages 10.1.7. Hot Plug Messages
10.3. Receive Buffer Reordering x
10.3.1. Using Relaxed Ordering
11. Throughput Optimization x
11.1. Throughput of Posted Writes 11.2. Throughput of Non-Posted Reads
12. Design Implementation x
12.1. Making Analog QSF Assignments Using the Assignment Editor 12.2. Making Pin Assignments to Assign I/O Standard to Serial Data Pins 12.3. Recommended Reset Sequence to Avoid Link Training Issues 12.4. SDC Timing Constraints
13. Additional Features x
13.1. Configuration over Protocol (CvP) 13.2. Autonomous Mode 13.3. ECRC
13.2. Autonomous Mode x
13.2.1. Enabling Autonomous Mode 13.2.2. Enabling CvP Initialization
13.3. ECRC x
13.3.1. ECRC on the RX Path 13.3.2. ECRC on the TX Path
15. Transceiver PHY IP Reconfiguration x
15.1. Connecting the Transceiver Reconfiguration Controller IP Core 15.2. Transceiver Reconfiguration Controller Connectivity for Designs Using CvP
16. Testbench and Design Example x
16.1. Endpoint Testbench 16.2. Root Port Testbench 16.3. Test Driver Module 16.4. Root Port Design Example 16.5. Root Port BFM Overview 16.6. BFM Procedures and Functions 16.7. Setting Up Simulation
16.1. Endpoint Testbench x
16.1.1. Endpoint Testbench for SR-IOV
16.5. Root Port BFM Overview x
16.5.1. BFM Memory Map 16.5.2. Configuration Space Bus and Device Numbering 16.5.3. Configuration of Root Port and Endpoint 16.5.4. Issuing Read and Write Transactions to the Application Layer
16.6. BFM Procedures and Functions x
16.6.1. ebfm_barwr Procedure 16.6.2. ebfm_barwr_imm Procedure 16.6.3. ebfm_barrd_wait Procedure 16.6.4. ebfm_barrd_nowt Procedure 16.6.5. ebfm_cfgwr_imm_wait Procedure 16.6.6. ebfm_cfgwr_imm_nowt Procedure 16.6.7. ebfm_cfgrd_wait Procedure 16.6.8. ebfm_cfgrd_nowt Procedure 16.6.9. BFM Configuration Procedures 16.6.10. BFM Shared Memory Access Procedures 16.6.11. BFM Log and Message Procedures 16.6.12. Verilog HDL Formatting Functions
16.6.9. BFM Configuration Procedures x
16.6.9.1. ebfm_cfg_rp_ep Procedure 16.6.9.2. ebfm_cfg_decode_bar Procedure
16.6.10. BFM Shared Memory Access Procedures x
16.6.10.1. Shared Memory Constants 16.6.10.2. shmem_write Task 16.6.10.3. shmem_read Function 16.6.10.4. shmem_display Verilog HDL Function 16.6.10.5. shmem_fill Procedure 16.6.10.6. shmem_chk_ok Function
16.6.11. BFM Log and Message Procedures x
16.6.11.1. ebfm_display Verilog HDL Function 16.6.11.2. ebfm_log_stop_sim Verilog HDL Function 16.6.11.3. ebfm_log_set_suppressed_msg_mask Task 16.6.11.4. ebfm_log_set_stop_on_msg_mask Verilog HDL Task 16.6.11.5. ebfm_log_open Verilog HDL Function 16.6.11.6. ebfm_log_close Verilog HDL Function
16.6.12. Verilog HDL Formatting Functions x
16.6.12.1. himage1 16.6.12.2. himage2 16.6.12.3. himage4 16.6.12.4. himage8 16.6.12.5. himage16 16.6.12.6. dimage1 16.6.12.7. dimage2 16.6.12.8. dimage3 16.6.12.9. dimage4 16.6.12.10. dimage5 16.6.12.11. dimage6 16.6.12.12. dimage7
16.7. Setting Up Simulation x
16.7.1. Changing Between Serial and PIPE Simulation 16.7.2. Using the PIPE Interface for Gen1 and Gen2 Variants 16.7.3. Viewing the Important PIPE Interface Signals 16.7.4. Disabling the Scrambler for Gen1 and Gen2 Simulations 16.7.5. Disabling 8B/10B Encoding and Decoding for Gen1 and Gen2 Simulations 16.7.6. Changing between the Hard and Soft Reset Controller
17. Debugging x
17.1. Hardware Bring-Up Issues 17.2. Link Training 17.3. Use Third-Party PCIe Analyzer 17.4. BIOS Enumeration Issues
17.2. Link Training x
17.2.1. Debugging Link that Fails To Reach L0 17.2.2. Link Hangs in L0 State
B. Document Revision History x
B.1. Document Revision History of the Arria® V GZ Avalon® Streaming (Avalon-ST) Interface for PCIe* Solutions User Guide
1. Datasheet
2. Getting Started with the Arria® V GZ Hard IP for PCI Express
3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design
4. Parameter Settings
5. Interfaces and Signal Descriptions
6. Registers
7. Interrupts
8. Error Handling
9. PCI Express Protocol Stack
10. Transaction Layer Protocol (TLP) Details
11. Throughput Optimization
12. Design Implementation
13. Additional Features
14. Hard IP Reconfiguration
15. Transceiver PHY IP Reconfiguration
16. Testbench and Design Example
17. Debugging
A. Lane Initialization and Reversal
B. Document Revision History

5.11.2. Configuration Space Register Access

The tl_cfg_ctl signal is a multiplexed bus that contains the contents of Configuration Space registers as shown in the figure below. Information stored in the Configuration Space is accessed in round robin order where tl_cfg_add indicates which register is being accessed. The following table shows the layout of configuration information that is multiplexed on tl_cfg_ctl.

Figure 22. Multiplexed Configuration Register Information Available on tl_cfg_ctl Fields in blue are available only for Root Ports.
Table 37.  Configuration Space Register Descriptions

Register

Width

Direction

Description

cfg_dev_ctrl

16

Output

cfg_devctrl[15:0] is Device Control for the PCI Express capability structure.

cfg_dev_ctrl2

16

Output

cfg_dev2ctrl[15:0] is Device Control 2 for the PCI Express capability structure.

cfg_slot_ctrl

16

Output

cfg_slot_ctrl[15:0] is the Slot Status of the PCI Express capability structure. This register is only available in Root Port mode.

cfg_link_ctrl

16

Output

cfg_link_ctrl[15:0]is the primary Link Control of the PCI Express capability structure.

For Gen2 or Gen3 operation, you must write a 1’b1 to the Retrain Link bit (Bit[5] of the cfg_link_ctrl) of the Root Port to initiate retraining to a higher data rate after the initial link training to Gen1 L0 state. Retraining directs the Link Training and Status State Machine (LTSSM) to the Recovery state. Retraining to a higher data rate is not automatic for the Arria® V GZ Hard IP for PCI Express IP Core even if both devices on the link are capable of a higher data rate.

cfg_link_ctrl2

16

Output

cfg_link_ctrl2[31:16] is the secondary Link Control register of the PCI Express capability structure for Gen2 operation.

When tl_cfg_addr=4'b0010, tl_cfg_ctl returns the primary and secondary Link Control registers, { {cfg_link_ctrl[15:0], cfg_link_ctrl2[15:0]}. The primary Link Status register contents are available on tl_cfg_sts[46:31].

For Gen1 variants, the link bandwidth notification bit is always set to 0. For Gen2 variants, this bit is set to 1.

cfg_prm_cmd

16

Output

Base/Primary Command register for the PCI Configuration Space.

cfg_root_ctrl

8

Output

Root control and status register of the PCI Express capability. This register is only available in Root Port mode.

cfg_sec_ctrl

16

Output

Secondary bus Control and Status register of the PCI Express capability. This register is available only in Root Port mode.

cfg_secbus

8

Output

Secondary bus number. This register is available only in Root Port mode.

cfg_subbus

8

Output

Subordinate bus number. This register is available only in Root Port mode.

cfg_msi_addr

64

Output

cfg_msi_add[63:32] is the message signaled interrupt (MSI) upper message address. cfg_msi_add[31:0] is the MSI message address.

cfg_io_bas

20

Output

The upper 20 bits of the I/O limit registers of the Type1 Configuration Space. This register is only available in Root Port mode.

cfg_io_lim

20

Output

The upper 20 bits of the IO limit registers of the Type1 Configuration Space. This register is only available in Root Port mode.

cfg_np_bas

12

Output

The upper 12 bits of the memory base register of the Type1 Configuration Space. This register is only available in Root Port mode.

cfg_np_lim

12

Output

The upper 12 bits of the memory limit register of the Type1 Configuration Space. This register is only available in Root Port mode.

cfg_pr_bas

44

Output

The upper 44 bits of the prefetchable base registers of the Type1 Configuration Space. This register is only available in Root Port mode.

cfg_pr_lim

44

Output

The upper 44 bits of the prefetchable limit registers of the Type1 Configuration Space. Available in Root Port mode.

cfg_pmcsr

32

Output

cfg_pmcsr[31:16] is Power Management Control and cfg_pmcsr[15:0]is the Power Management Status register.

cfg_msixcsr

16

Output

MSI-X message control.

cfg_msicsr

16

Output

MSI message control. Refer to the following table for the fields of this register.

cfg_tcvcmap

24

Output

Configuration traffic class (TC)/virtual channel (VC) mapping. The Application Layer uses this signal to generate a TLP mapped to the appropriate channel based on the traffic class of the packet.

  • cfg_tcvcmap[2:0]: Mapping for TC0 (always 0).
  • cfg_tcvcmap[5:3]: Mapping for TC1.
  • cfg_tcvcmap[8:6]: Mapping for TC2.
  • cfg_tcvcmap[11:9]: Mapping for TC3.
  • cfg_tcvcmap[14:12]: Mapping for TC4.
  • cfg_tcvcmap[17:15]: Mapping for TC5.
  • cfg_tcvcmap[20:18]: Mapping for TC6.
  • cfg_tcvcmap[23:21]: Mapping for TC7.
cfg_msi_data

16

Output

cfg_msi_data[15:0] is message data for MSI.

cfg_busdev

13

Output

Bus/Device Number captured by or programmed in the Hard IP.

Figure 23. Configuration MSI Control Status Register
Table 38.   Configuration MSI Control Status Register Field Descriptions

Bit(s)

Field

Description

[15:9]

Reserved

N/A

[8]

mask capability

Per-vector masking capable. This bit is hardwired to 0 because the function does not support the optional MSI per-vector masking using the Mask_Bits and Pending_Bits registers defined in the PCI Local Bus Specification. Per-vector masking can be implemented using Application Layer registers.

[7]

64-bit address capability

64-bit address capable.

  • 1: function capable of sending a 64-bit message address
  • 0: function not capable of sending a 64-bit message address

[6:4]

multiple message enable

This field indicates permitted values for MSI signals. For example, if “100” is written to this field 16 MSI signals are allocated.

  • 3’b000: 1 MSI allocated
  • 3’b001: 2 MSI allocated
  • 3’b010: 4 MSI allocated
  • 3’b011: 8 MSI allocated
  • 3’b100: 16 MSI allocated
  • 3’b101: 32 MSI allocated
  • 3’b110: Reserved
  • 3’b111: Reserved

[3:1]

multiple message capable

This field is read by system software to determine the number of requested MSI messages.

  • 3’b000: 1 MSI requested
  • 3’b001: 2 MSI requested
  • 3’b010: 4 MSI requested
  • 3’b011: 8 MSI requested
  • 3’b100: 16 MSI requested
  • 3’b101: 32 MSI requested
  • 3’b110: Reserved

[0]

MSI Enable

If set to 0, this component is not permitted to use MSI.

Related Information
Level Two Title