DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 9/02/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

6.3. Sink Non-GPU Mode Support

The Intel FPGA DisplayPort sink supports non-GPU mode, which allows the IP to run on hardware without software API control.

The DisplayPort sink capability registers are implemented in the IP and support limited features.

DP2.0 Link Rates require GPU mode.

Table 36.  DisplayPort Sink Capability Registers
DPCD Offset DPCD Register Default Value Description

0000h

DPCD_REV

12h

DPCD revision 1.2

0001h

MAX_LINK_RATE

Configurable through parameter editor

 

0002h

MAX_LANE_COUNT

Configurable through parameter editor

 

POST_LT_ADJ_REQ_SUPPORTED

0b

Not supported

TPS3_SUPPORTED

1b

Supported

ENHANCED_FRAME_CAP

0b

Not supported

0003h

MAX_DOWNSPREAD

1b

Down-spread up to 0.5%

NO_AUX_TRANSACTION_LINK_TRAINNG

1b

Supported

TPS4_SUPPORTED

1b

Supported

0005h

DOWN_STREAM_PORT_PRESENT

00h

Not supported

0006h

MAIN_LINK_CHANNEL_CODING

01h

8B/10B

0007h

MSA_TIMING_PAR_IGNORED

0b

Not supported

OUI Support

1b

Supported

000Dh

eDP CONFIGURATION CAPABILITY

Configurable through parameter editor

Indicates that this is an eDP device that can use eDP alternate scrambler reset value of FFFEh

000Eh

TRAINING_AUX_RD_INTERVAL

00h

  • 100 us for CR phase
  • 4 ms for Channel EQ phase

EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT

1b

Supported