Customizable Flash Programmer User Guide

Download PDF
ID 683271
Date 4/28/2023
Public
Document Table of Contents
Document Table of Contents x
1. Customizable Flash Programmer Overview 2. Customizable Flash Programmer 3. Implementing the Customizable Flash Programmer 4. Document Revision History for the Customizable Flash Programmer User Guide
1. Customizable Flash Programmer Overview x
1.1. Device Family Support 1.2. Software Support
2. Customizable Flash Programmer x
2.1. Programmer Image 2.2. System Console TCL Script 2.3. Limitations and Restrictions
3. Implementing the Customizable Flash Programmer x
3.1. Generating the Raw Programming Data File (.rpd) from User Design 3.2. Compiling the Programmer Image Project and Generating the .sof File 3.3. Customizing the TCL Script 3.4. Programming the Flash Using the System Console
3.1. Generating the Raw Programming Data File (.rpd) from User Design x
3.1.1. Understanding Quad SPI Flash Byte-Addressing 3.1.2. Understanding Dummy Clock Cycles for Single and Quad IO Fast Read 3.1.3. Generating the .rpd File Using the Convert Programming File Tool
3.1.3. Generating the .rpd File Using the Convert Programming File Tool x
3.1.3.1. Generating .rpd File for Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices 3.1.3.2. Generating .rpd File for Other FPGA Devices
3.2. Compiling the Programmer Image Project and Generating the .sof File x
3.2.1. Configuring the IP Cores Setting 3.2.2. Assigning External Clock Source for the IP Cores 3.2.3. Generating the Programmer Image .sof File from the Reference Project
3.2.1. Configuring the IP Cores Setting x
3.2.1.1. Configuring JTAG to Avalon® Master Bridge IP Core 3.2.1.2. Configuring Intel AvMM Bursting Master IP Core 3.2.1.3. Configuring Generic Serial Flash Interface IP Core
3.3. Customizing the TCL Script x
3.3.1. TCL Script Structures 3.3.2. TCL Script User Setting 3.3.3. Customizing the Programming Flow 3.3.4. Creating Custom Functions
3.4. Programming the Flash Using the System Console x
3.4.1. Executing Commands in the System Console 3.4.2. Executing the System-Console Commands in the Nios® II Command Shell
1. Customizable Flash Programmer Overview
2. Customizable Flash Programmer
3. Implementing the Customizable Flash Programmer
4. Document Revision History for the Customizable Flash Programmer User Guide

3.2.2. Assigning External Clock Source for the IP Cores

The reference design utilizes the internal oscillator as the clock source. If you want to use an external clock as the source, you need to assign the external clock pin in Pin Assignment Editor accordingly.

For certain devices such as Stratix® IV, you cannot use the internal oscillator as the clock source. You must use an external clock as the source and you need to assign the external clock pin accordingly.

Level Two Title