Intel® Quartus® Prime Pro Edition User Guide: Power Analysis and Optimization

ID 683174
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.6. Power Optimization Revision History

The following revision history applies to this chapter:

Table 14.  Document Revision History
Document Version Intel® Quartus® Prime Version Changes
2022.12.12 22.4 Revised wording of Clock Enable topic for clarity.
2022.01.17 21.4 Added Clock Gating topics in the Design Guidelines section.
2021.10.04 21.3 Modified the Compiler Settings topic.
2020.12.07 18.1.0 Added note to the Toggle Rate topic.
2019.08.02 18.1.0
  • Corrected typo in "Viewing Clock Details in the Chip Planner" topic.
  • Corrected typo in "Pipelining and Retiming" topic.
  • Corrected typo in "Implementation" topic.
  • Updated "DDR Memory Controller Settings" topic for latest IP name and to correct typos.
  • Corrected typo in "Pipeline Logic to Reduce Glitching" topic.
2018.09.24 18.1.0
  • Added topic: Factors Affecting Power Consumption, moved from chapter: Power Analysis
  • Extended content about Power Optimization Advisor with a description of recommendations.
  • Added design guidelines: Memories (M20K/MLAB), DDR Memory Controller Settings, DSP Implementation, Reducing High-Speed Tile (HST) Usage, Unused Transceiver Channels, Periphery Power reduction XCVR Settings
  • Removed content referring to device families not supported in Intel Quartus Prime Pro Edition.
2018.06.11 18.0.0
  • Moved general information about the Design Space Explorer (DSE II) to the Design Optimization User Guide, left a section about using DSE II for Power-Driven Optimization.
2018.05.07 18.0.0
  • Moved general information about the Design Space Explorer (DSE II) to the Design Optimization User Guide, left a section about using DSE II for Power-Driven Optimization.
2016.10.31 16.1.0
  • Implemented Intel rebranding.
  • Removed statement of support for gate-level timing simulation.
2015.11.02 15.1.0 Changed instances of Quartus II to Intel® Quartus® Prime .
  • Updated screenshot for DSE II GUI.
  • Added information about remote hosts for DSE II.
2014.12.15 14.1.0
  • Updated location of Fitter Settings, Analysis & Synthesis Settings, and Physical Synthesis Optimizations to Compiler Settings.
  • Updated DSE II GUI and optimization settings.
2014.06.30 14.0.0 Updated the format.
May 2013 13.0.0 Added a note to “Memory Power Reduction Example” on Qsys and SOPC Builder power savings limitation for on-chip memory block.
June 2012 12.0.0 Removed survey link.
November 2011 10.0.2 Template update.
December 2010 10.0.1 Template update.
July 2010 10.0.0
  • Was chapter 11 in the 9.1.0 release
  • Updated Figures 14-2, 14-3, 14-6, 14-18, 14-19, and 14-20
  • Updated device support
  • Minor editorial updates
November 2009 9.1.0
  • Updated Figure 11-1 and associated references
  • Updated device support
  • Minor editorial update
March 2009 9.0.0
  • Was chapter 9 in the 8.1.0 release
  • Updated for the Quartus II software release
  • Added benchmark results
  • Removed several sections
  • Updated Figure 13–1, Figure 13–17, and Figure 13–18
November 2008 8.1.0
  • Changed to 8½” × 11” page size
  • Changed references to altsyncram to RAM
  • Minor editorial updates
May 2008 8.0.0
  • Added support for Stratix IV devices
  • Updated Table 9–1 and 9–9
  • Updated “Architectural Optimization” on page 9–22
  • Added “Dynamically-Controlled On-Chip Terminations” on page 9–26
  • Updated “Referenced Documents” on page 9–29
  • Updated references