Article ID: 000086280 Content Type: Troubleshooting Last Reviewed: 06/22/2017

Overclocking not supported. Cannot set MPU frequency to 1000 MHz. It exceeds the maximum operating speed of 800 MHz supported by this part

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Quartus® Prime  Standard and Pro software version 16.0 and earlier, you may see the error on Arria® 10 Hard Processor System in Qsys when a selected device and VCCL_HPS are -3 grade and 0.95V, respectively.

    Resolution

    This problem is fixed beginning with the Quartus Prime Standard and Pro software version 16.1.

    Related Products

    This article applies to 1 products

    Intel® Arria® 10 SX SoC FPGA