Article ID: 000078153 Content Type: Troubleshooting Last Reviewed: 09/11/2012

Why can't I properly program the flash device on my DSP Development Kit, Stratix Edition (EP1S25) or DSP Development Kit, Stratix Professional Edition (EP1S80)?

Environment

  • DSP
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description Some of these development kits have flash memory devices that don't work with the old flash erasing algorithm. Therefore, factory reconfiguration and/or flash programming for non-volatile configuration might not work.

    An updated design is provided with the latest installers, which can be downloaded from http://fpgadownload.intel.com/outgoing/devkit/Stratix_DSP_Starter-v1.3.1.zip and http://fpgadownload.intel.com/outgoing/devkit/Stratix_DSP_Pro-v1.3.1.zip. The utility to update the configuration design can be found in the development kit installation directory under <installation directory>\Utilities\FactoryRestoration. The readme.txt file provides instructions for updating the board.

    Related Products

    This article applies to 1 products

    Stratix® FPGAs