Article ID: 000074764 Content Type: Product Information & Documentation Last Reviewed: 02/13/2023

How do I resolve the problem with an Intel® Stratix® 10 FPGA IOPLL not being able to obtain lock when the input refclk is driven by an output clock from the Intel Stratix 10 FPGA E-Tile?

Environment

  • Intel® Quartus® Prime Pro Edition
  • IOPLL Intel® FPGA IP
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    The Intel® Stratix® 10 FPGA IOPLL is not being able to obtain lock when the input refclk is driven by an output clock from the Intel Stratix 10 FPGA E-Tile.

    Resolution

    You must perform user recalibration of the IOPLL after the output clocks from the Intel Stratix 10 FPGA E-Tile are stable.

    Holding the Intel Stratix 10 FPGA IOPLL in reset until output clocks from the Intel Stratix 10 FPGA E-Tile are stable or pulsing the reset after the output clocks are stable will not resolve the Intel Stratix IOPLL unlocked state.

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs