User Guide for Installing Four DRAM Memory Modules in a System

Documentation

Install & Setup

000058140

03/18/2021

The instructions below show how to install memory in the system with 4 DRAM modules.

Follow the steps below:-

1. Identify DRAM Slots

Identify DRAM Slots

  1. Find the memory (DRAM) slots on the board (fig. 1).
  2. Identify the four DRAM slots (highlighted in yellow) and open the tabs at the top of each slot.

2. Align DRAM Modules

Align DRAM Modules 1 Align DRAM Modules 2

Align the DRAM modules into the four slots. You will see a notch in the middle of the gold contacts on the DRAM module. This break is not in the middle of the module. You will need to orient the module so that the break is properly aligned into the notch in the slot (fig. 2 and 3).

 

3. Install DRAM Modules

Start by pressing down on the middle of the module, then firmly press on to each side of the module until you hear a click (fig. 4).

Install DRAM Modules

This video that shows how to install memory in the system with 4 DRAM modules.