One of the following Error Codes was received when managing an Intel® Optane™ memory device: 0xA0070002, 0xA0040002.
How to fix it:
The drive to be accelerated isn’t compatible with Intel Optane memory or the drive may be configured as an incompatible drive type.
Steps to resolve:
|Note||Back up all data/files before proceeding with the steps below.|
Drives that have been configured as the 'Dynamic' type are not supported for acceleration, these should be 'Basic' type.
Step 1: Confirm the drive type of the drive to be accelerated.
- Press “Windows Key + x” and select Disk Management.
- Confirm the listing for the drive to be accelerated under the Type column is Basic.
Step 2: If the drive is configured as the Dynamic type, this will need to be reconfigured as Basic to support Intel Optane Memory. The OS can be reinstalled or the use of a third-party tool may be able to make this conversion without installation
If the error persists or any additional help is needed, contact support under Memory and Storage.
Cause & More Information:
|Intel® Optane™ Optane Memory User Guide|
THE INFORMATION IN THIS ARTICLE HAS BEEN USED BY OUR CUSTOMERS BUT NOT TESTED, FULLY REPLICATED, OR VALIDATED BY INTEL. INDIVIDUAL RESULTS MAY VARY. ALL POSTINGS AND USE OF THE CONTENT ON THIS SITE ARE SUBJECT TO THE TERMS AND CONDITIONS OF USE OF THE SITE.