Article ID: 000056629 Content Type: Error Messages Last Reviewed: 11/16/2022

Graphics Driver Installation Error: "Your system has a driver that is locked to manufacturer specification."

Environment

This issue most often occurs because the driver currently installed on the system is non-DCH. DCH driver 26.20.100.8141 or newer drivers will only install over OEM DCH drivers. 

Windows® 10, 64-bit*

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

Solution for how to install Intel® Graphics Driver 26.20.100.8141 or newer drivers when receiving Original Equipment Manufacturer (OEM) installation errors.

Description

When installing the Intel graphics driver, the following message appears:

"Your system has a driver that is locked to manufacturer specification. Please try downloading the latest driver from the manufacturer's website to update. Exit code 1".

Resolution
Caution

The steps below will remove Original Equipment Manufacturer (OEM) customizations for your platform. If your OEM doesn't have an available DCH driver, Windows Update will most likely not install any customizations after you upgrade to driver 26.20.100.8141 or newer.

If you experience any issues such as flickering, blue screen (BSOD), timeout, detection, and recovery (TDR) failure, etc., reinstall the latest OEM driver for your platform.

If you receive an OEM error when installing graphics driver 26.20.100.8141 or newer, follow these instructions:

  1. Verify that your system has a supported processor generation such as a 6th Generation Intel Processor or higher. To confirm your processor generation, see how to identify your processor here.
  2. Verify that your system has a supported operating system (OS) version. This driver supports Windows 10, 64-bit, version 1709 (also known as "Redstone 3") or higher. To confirm your OS version, see how to identify your OS here.
  3. Download the appropriate driver for your system from the appropriate link below:
    Integrated graphics with the 6th generation to 10th generation Intel® Processors
    Intel® Arc™ discrete graphics and/or integrated graphics with the 11th generation or newer generation Intel® Processors
    Intel® Arc™ Pro discrete graphics
  4. Disconnect the internet connection so Windows Update won't automatically reinstall a previous OEM driver.
  5. Run the downloaded .exe file.
  6. During the installation process, when you reach the Install stage, click the Customize button
  7. Make sure not to enable the Execute a clean installation check box.
  8. After finishing the driver installation, click the Optional reboot button.
  9. Select the Windows Start icon and click the Settings Gear icon to navigate to Update and Security
  10. Select Windows Update and click Check for updates in case there are OEM customizations to reinstall.
Additional information

Intel Graphics DCH Drivers are unlocked to upgrade freely between Original Equipment Manufacturer (OEM) drivers and the Intel Generic Graphics Drivers on Download Center starting with driver 26.20.100.8141.

Related Products

This article applies to 106 products