Article ID: 000033634 Content Type: Troubleshooting Last Reviewed: 02/21/2023

How Can I Configure or Reset the Intel® Optane™ Memory in MSI* System to Non-Optane?

Environment

MSI*

Windows® 10 family

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

How to configure the MSI* BIOS to set the Intel® Optane™ Memory

Description

System is ready for Intel Optane™ but no module is detected.

Resolution

To set Optane in BIOS:

  1. Shut down and boot into your BIOS.
  2. Press F7 to go to the advanced mode.
  3. Go to Settings\Boot\ Boot configuration and check the following option: Boot Mode Select = UEFI.
  4. Go to Settings\Advanvced\ Windows Os Configuration and make sure that the option that says Windows* 8.1/10 WHQL Support is enabled.
  5. Go to settings\SATA Configuration and check the following options: -SATA Mode: RAID/Optane™ Mode -M.2 Genie: Enabled -M.2_1 - RST PCIe Storage Remapping: Enabled.


Reinstall OS and configured BIOS with steps provided. Also reinstall the Intel Optane drivers.

To reset to non Optane:

  1. Open the BIOS.
  2. Go to Settings>> Advanced >>Intel Rapid Storage Technology.
  3. Select Intel PCIe (Optane module with serial number) >> Select Reset to non Optane.
  4. Save changes and boot to Windows* again.
  5. Open Optane application in order to enable again the Optane module.

Related Products

This article applies to 1 products