How to Work around “IPMI Cipher Suite Zero Authentication” Error Message

Documentation

Troubleshooting

000024017

01/13/2023

Issue: Error: IPMI Cipher Suite Zero Authentication when running a security scan.

Resolution: Error message can be resolved by simply disabling the IPMI over LAN through the Intelligent Platform Management Interface (IPMI)1 Interface (Shell);
see section 2.12 of Intel® Server Systems Baseboard Management Controller (BMC) and BIOS document.

1 Since IPMI is an industry standard protocol, developed by Intel and supported by over two hundred vendors, refer to How to check if IPMI Cipher 0 is off for further detailed information​.

“This last link is provided for your convenience and should not be viewed as an endorsement by Intel of the content, products, or services offered there.
Third Party Content: Web Sites and Materials may contain user or third party submitted content; such content is not reviewed, approved or endorsed by Intel and is provided solely as a convenience to our customers and users. Under no circumstances will Intel be liable in any way for any third party submitted or provided content, including, but not limited to, any errors or omissions, or damages of any kind. ANY MATERIAL DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE USE OF THE MATERIALS IS DONE AT YOUR OWN DISCRETION AND RISK AND THAT YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR OTHER DEVICE OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF ANY SUCH MATERIAL. By your use you agree that you must evaluate, and bear all risks associated with, the use of any third party content, including any reliance on the accuracy, completeness, or usefulness of such content. All postings and use of the Web Sites or Material are subject to these Terms of Use and any other program and site specific terms.”