System Memory for Intel® Desktop Board DH67VR

Documentation

Compatibility

000007864

09/26/2017


System memory features
The board has four DIMM sockets and supports the following memory features:

  • 1.5V DDR3 SDRAM DIMMs with gold-plated contacts, with the option to raise the voltage to support higher-performance DDR3 SDRAM DIMMs
  • Support for 1.35V Low Voltage DDR3 (new JEDEC specification)
  • Two independent memory channels with interleaved mode support
  • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported
  • 32 GB maximum total system memory (with 4 Gb memory technology)
  • Minimum recommended total system memory: 512 MB
  • Non-ECC DIMMs
  • Serial Presence Detect
  • DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs

To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.

1.5V is the recommended and default setting for DDR3 memory voltage. The other memory voltage settings in the BIOS Setup program are provided for performance tuning purposes only. Altering the memory voltage may (i) reduce system stability and the useful life of the system, memory, and processor; (ii) cause the processor and other system components to fail; (iii) cause reductions in system performance; (iv) cause additional heat or other damage; and (v) affect system data integrity.

Intel has not tested and does not warranty the operation of the processor beyond its specifications. For information on the processor warranty, refer to Processor Warranty Information

Supported memory configurations

DIMM Capacity Configuration SDRAM Density SDRAM Organization Front-side/Back-side Number of SDRAM Devices
512 MB Single-sided 1 Gbit 64 M x 16 / empty 4
1 GB Single-sided 1 Gbit 128 M x 8 / empty 8
1 GB Single-sided 2 Gbit 128 M x 16 / empty 4
2 GB Double-sided 1 Gbit 128 M x 8 / 128 M x 8 16
2 GB Single-sided 2 Gbit 128 M x 16 / empty 8
4 GB Double-sided 2 Gbit 256 M x 8 / 256 M x 8 16
4 GB Single-sided 4 Gbit 512 M x 4 / empty 8
8 GB Double-sided 4 Gbit 512 M x 8 / 512 M x 8 16

Tested memory

The table below lists parts which passed testing during development. These part numbers may not be readily available throughout the product life cycle.
 

Module Supplier Module Part Number Size Module Speed (MHz)
ADATA M3OHYMH3J4130G2C5Z 2 GB 1333
ADATA AX3U1600GB2G9 2 GB 1600
APACER 240P 1 GB 1333
ELPIDA EBJ10UE8BAFA-AG-E 1 GB 1066
ELPIDA EBJ10UE8BDF0 1 GB 1333
ELPIDA EBJ21UE8BBF0 2 GB 1066
ELPIDA EBJ21UE8BBF0-DJ-F 2 GB 1333
Hynix HMT112U6BFR8C-G7 1 GB 1066
Hynix HMT112U6TFR8C-H9 1 GB 1333
Hynix HMT125U6BFR8C-G7 2 GB 1066
Hynix HMT125U6BFR8C-H9 2 GB 1333
Hynix HMT351U6AFR8C-H9 4 GB 1333
KINGSTON HP497156-C01-ELB 1 GB 1333
KINGSTON KHX1866C9D3T1K3/3GX 1 GB 1866
KINGSTON KHX1600C9D3 2 GB 1600
KINGSTON KHX2133C9AD3T1K2 2 GB 2133
Micron MT8JTF12864AY 1 GB 1066
Micron MT8JTF12864AZ-1G4F1 1 GB 1333
Micron MT16JTF25664AY-1G1D1 2 GB 1066
Micron MT16JTF25664AY-1G4D1 2 GB 1333
QIMONDA IMSH1GU13A1F1C 1 GB 1066
QIMONDA IMSH2GU13A1F1C 2 GB 1333
QIMONDA IMSH51U03A1F1C 512 MB 1066
SAMSUNG M378B22873DZ1-CH9 1 GB 1333
SAMSUNG M378B5673FH0-CH9 2 GB 1333
SAMSUNG M378B5273DH0-CH9 4 GB 1333
SAMSUNG M378B2873EH1-CF8 1 GB 1066
SAMSUNG M378B5673DZ1-CF8 2 GB 1066