System Memory for the Intel® Desktop Board DH55HC

Documentation

Compatibility

000005876

08/25/2017


Memory features
The board has four DIMM sockets and supports the following memory features:

  • Two independent memory channels with interleaved mode support
  • Support for non-ECC, unbuffered, single-sided, or double-sided DIMMs with x8 organization
  • 16 GB maximum total system memory (with 2 Gb memory technology)
  • Minimum total system memory: 1 GB using 1 Gb x8 module
  • Serial Presence Detect
  • DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs

To be fully compliant with all applicable Intel ® SDRAM memory specifications, the board should have DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you receive a notification to this effect on the screen at power up. The BIOS tries to configure the memory controller for normal operation.

32-bit operating systems are limited to a maximum of 4 GB of memory. These operating systems report less than 4 GB because of the memory used by add-in graphics cards and other system resources.

When using a processor without Intel Graphics Technology, memory must be installed in either or both of the DIMM 0 (blue) memory sockets for the system to boot.

Supported memory configurations

DIMM Capacity Configuration SDRAM Density SDRAM Organization Front-side/Back-side Number of SDRAM Devices
1 GB SS 1 Gbit 1 Gb x 8 / empty 8
2 GB DS 1 Gbit 1 Gb x 8 / 1 Gb x 8 16
2 GB SS 2 Gbit 2 Gb x 8 / empty 8
4 GB DS 2 Gbit 2 Gb x 8 / 2 Gb x 8 16
 

“DS” stands for double-sided memory modules (two rows of SDRAM) and “SS” stands for single-sided memory modules (one row of SDRAM).

Tested memory
Computer Memory Test Labs* (CMTL) tests third-party memory for compatibility with Intel boards as requested by memory manufacturers. See the CMTL tested memory list for the Intel® Desktop Board DH55HC.

The table below lists parts which passed testing during development. These part numbers may not be readily available throughout the product life cycle.

Module Supplier/Module Part Number Module Size Module Speed (MHz) ECC or Non-ECC? Component Used/Comp Part Number
Elpida* EBJ10UE8BAFA-AE-E 1 GB 1066 Non-ECC Elpida JPN J1108BASE-AE-E
Elpida EBJ10UE8BAFA-DJ-E 1 GB 1333 Non-ECC Elpida JPN J1108BASE-DJ-E
Elpida EBJ10UE8BBF0-DJ-F 1 GB 1333 Non-ECC Elpida TWN J1108BBSE-DJ-F
Elpida EBJ10UE8BBF0-DJ-F 1 GB 1333 Non-ECC Elpida TWN J1108BBSE-DJ-F
Hynix* HMT125U6BFR8C-G7 2 GB 1066 Non-ECC Hynix H5TQ1G8BBFRG7C
Hynix HMT351U6MFR8C-H9 4 GB 1333 Non-ECC Hynix H5TQ2G93AFR
Kingston* HP497156-C01-ELD 1 GB 1333 Non-ECC Elpida TWN J1108BDSE-DJ-F
Micron* CT12864BA1067.8FF 1 GB 1066 Non-ECC Micron MT41J128M8JP-187E:F
Micron CT12864BA1339.8FF 1 GB 1333 Non-ECC Micron MT41J128M8JP-15E:F
Micron CT12864BA1339.8FF 1 GB 1333 Non-ECC Micron MT41J128M8JP-15E:F
Micron CT25664BA1339.16FF 2 GB 1333 Non-ECC Micron MT41J128M8JP-15E:F
Micron CT25664BA1339.8FD 2 GB 1333 Non-ECC Micron MT41J256M8HX-15E:D
Micron CT2864BA1067.8FF 1 GB 1066 Non-ECC Micron MT41J128M8JP-187E:F
Micron MT16JTF25664AY-1G4D1 2 GB 1333 Non-ECC  
Micron MT16JTF25664AY-1G4D1 2 GB 1333 Non-ECC  
Micron MT8JTF12864AY-1G4D1 1 GB 1333 Non-ECC  
Micron MT8JTF25664AZ-1G1D1 2 GB 1066 Non-ECC Micron MT41J256M8HX-15:D
Micron MT8JTF12864AZ-1G1F1 1 GB 1066 Non-ECC Micron MT41J128M8JP-187E:F
Micron MT8JTF12864AZ-1G4F1 1 GB 1333 Non-ECC Micron MT41J128M8JP-15E:F
Micron MT8JTF12864AZ-1G4F1 1 GB 1333 Non-ECC Micron MT41J128M8JP-15E:F
Micron* MT8JTF25664AZ-1G4D1 2 GB 1333 Non-ECC Micron MT41J256M8HX-15E:D
Samsung M37886474DZ1-CH9 512 MB 1333 Non-ECC Samsung KB4B1G16460-HCH9
Samsung M378B2873DZ1-CH9 1 GB 1333 Non-ECC SEC* HCH9 C4B1G08460
Samsung M378B5673EH1-CH9 2 GB 1333 Non-ECC SEC HCH9 KB41G084GE