Intel® MAX® 10 - 10M08 Evaluation Kit

Intel® MAX® 10 FPGA Evaluation Kit is an entry-level board for the evaluation of the Intel® MAX® 10 FPGA technology.

Intel® MAX® 10 - 10M08 Evaluation Kit

With this evaluation board, you can:

  • Develop designs for the 10M08S, 144-EQFP FPGA
  • Measure FPGA power (VCC_CORE and VCC_IO)
  • Bridge between different I/O voltages (adjustable VCC_IO on Bank 8)
  • Read and write to the FPGA’s NOR flash memory
  • Use the FPGA’s analog-to-digital converter embedded block to measure incoming analog signals
  • Interface to external functions or devices via Arduino UNO R3 connectors or through-hole vias
  • Reuse the kit’s PCB board and schematic as a model for your design

Table 1. Intel® MAX® 10 - 10M08 Evaluation Kit Ordering Information

Ordering Code Find Distributor Ordering Information
EK-10M08E144

Intel® Solutions Marketplace

** Does not include programming cable (order separately) **

Note:

Buyer represents that it is a product developer, software developer or system integrator and acknowledges that this product is an evaluation kit that is not FCC authorized, is made available solely for evaluation and software development, and may not be resold.

Evaluation Kit Contents

The Intel® MAX® 10 FPGA – 10M08 Evaluation Kit includes the following:

  • CE-compliant Intel® MAX® 10 evaluation board
  • Intel® MAX® 10 FPGA (10M08, single power supply, 144-pin EQFP)
  • Intel® Enpirion® EP5388QI point-of-load, 800 mA, DC-DC step-down (buck) converter with an integrated inductor
  • JTAG header for download cable programming (POF) or configuration (SOF)
  • 50 MHz single-ended, external oscillator clock source
  • Shunt resistors and probe points to measure FPGA power
  • Switch, push buttons, jumpers, and status LEDs
  • Connectors:
  • Arduino headers to accept UNO R3 compatible Shields
  • General-purpose through-hole vias
  • Type mini-B USB connector (power source)
  • USB cable included
  • Footprint to install a potentiometer (customer must purchase and install)

Table 2. Intel® MAX® 10 - 10M08 Evaluation Kit Documents Available

Document

Description

Version

User Guide

Information about the evaluation kit hardware.

1.1

Complete kit document installation

(Windows PC only)

(Updated) Full installation of all files, including the user manual, BOM, layout, PCB, schematics, and other documents or files.

14.0.21

Note:

1This kit installation works with Intel® Quartus® Prime design software v14.0.2.