Intel® Ethernet Controller Driver for Linux* Based on the Intel® Server Board M10JNP2SB

19577
4/12/2020

Introduction

Provides Intel® Ethernet Controller Driver for Linux* based on the Intel® Server Board M10JNP2SB.

Available Downloads

  • CentOS 7.4*, Red Hat Enterprise Linux 7.4*, Red Hat Enterprise Linux 7.6*, CentOS 7.6*, SUSE Linux Enterprise Server 15*, Red Hat Enterprise Linux 7.5*
  • Size: 337.9 KB
  • SHA1: B1DE7A29A4EBD986D60F692423A15EE517FA4D0E

Detailed Description

Overview

This driver supports kernel versions 2.6.30 or newer. The associated Virtual
Function (VF) driver for this driver is igbvf.

Driver information can be obtained using ethtool, lspci, and ifconfig. Instructions on updating ethtool can be found in the section Additional

Configurations later in this document.

This driver is only supported as a loadable module at this time. Intel is not supplying patches against the kernel source to allow for static linking of the drivers.

This download is valid for the product(s) listed below.

Disclaimers1

Product and Performance Information

1

Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.